LiftMaster garage door spring replacement typically costs $150 to $350 for torsion springs and $100 to $200 for extension springs, including labor, with pricing shifting based on door size, spring quality, and whether cables or a torsion bar also need replacing. Roll-up doors and double-wide garage doors run higher, generally $200 to $500, given the added complexity. Getting a couple of quotes and knowing what’s actually included in each one- parts, labor, and any add-on services- is the best way to confirm you’re paying a fair price rather than an inflated one.
Key Takeaways
- Torsion spring and bar replacement typically runs $150 to $350; extension spring replacement runs $100 to $200.
- Replacing springs alongside cables adds cost, generally landing between $175 and $350 total.
- Roll-up and double garage doors cost more to service, usually $200 to $500, due to added complexity and labor.
- Individual torsion springs cost $30 to $100 each; extension springs cost $15 to $45 each, before labor.
- A spring tune-up or re-tensioning, when a full replacement isn’t needed, typically costs $50 to $150.
- Replacing both springs at once, even if only one failed, is standard practice to keep tension balanced.
LiftMaster Garage Door Spring Replacement Costs by Type
Seeing every replacement scenario side by side makes it easier to spot where your specific repair falls before you get a quote.
What You’ll Pay Based on Your Door and Spring Type
| Replacement Type | Average Cost | What’s Included |
| Torsion spring & bar | $150 to $350 | Spring ($30 to $100), bar if needed ($50 to $100), labor ($75 to $150) |
| Extension spring | $100 to $200 | Spring ($15 to $45), labor ($50 to $100) |
| Spring and cable replacement | $175 to $350 | Springs, cables ($30 to $60), labor ($75 to $150) |
| Roll-up door spring | $200 to $400 | Specialized springs, labor ($100 to $200) |
| Double garage door spring | $200 to $500 | Two matching springs ($60 to $200), labor ($100 to $200) |
| Spring tune-up or re-tensioning | $50 to $150 | Lubrication, adjustment, labor |
Quick DIY vs. pro guide: Getting quotes and comparing what’s included is fine to do yourself. Actually replacing or re-tensioning a spring should go to a licensed technician given the tension involved.
Understanding Garage Door Spring Costs
Garage door springs come in different types, each with its own price range and durability profile.
The Two Spring Types and What Drives Their Cost
Torsion Springs sit above the door and use torque to lift it, favored for durability and smooth operation, which is part of why they cost more than the alternative and why most modern residential doors use them by default.
Extension Springs sit on the sides of the door, stretching and contracting to assist movement, and are typically used on lighter doors at a lower price point. Beyond spring type, material quality and the size or weight capacity needed both push cost up or down for either type, and a heavier insulated door will generally need a more robust, pricier spring than a lightweight uninsulated one.
Why Door Weight Changes the Math More Than People Expect
A door’s material and insulation level affect spring cost more than most homeowners realize going in. Wood and insulated steel doors weigh considerably more than a basic uninsulated steel panel, which means the spring has to generate more torque or tension to counterbalance it. That added demand typically means a higher-rated spring, which costs more both to buy and to install correctly.
Detailed Breakdown of Garage Door Spring Replacement Costs
The total cost depends heavily on which specific replacement scenario applies to your door.
Torsion Spring, Extension Spring, and Cable Costs
Garage Door Torsion Spring & Bar Replacement: Averages $150 to $350. Individual torsion springs run $30 to $100 each depending on size and material; a torsion bar replacement adds $50 to $100 if needed, and installation labor runs $75 to $150 given the complexity and tension involved.
Garage Door Extension Spring Replacement: Averages $100 to $200. Extension springs cost $15 to $45 each, and installation is generally simpler and less costly, with labor around $50 to $100, though balance adjustments can add to the total.
Spring and Cable Replacement Together: Averages $175 to $350. Cables typically add $30 to $60 to the parts cost, and labor runs $75 to $150 given the added complexity of getting both components installed correctly.
Spring and cable replacement costs more than a spring alone because the labor reflects real complexity, not padding, since incorrect cable installation can cause uneven door operation or outright failure.
For a broader look at how torsion and extension springs compare in general, our guide Garage Door Spring Replacement: Expert Guide & Cost Breakdown covers both spring types and the full replacement process.
Roll-Up, Double Door, and Specialty Spring Costs
Some door configurations cost more to service than a standard single garage door.
Why Roll-Up and Double Doors Cost More to Service
Roll-Up Garage Door Spring Replacement: Averages $200 to $400. These doors need springs different from standard sectional doors, often requiring specialized tools, which pushes labor to $100 to $200. Roll-up systems are more common in commercial settings but do show up in some residential properties, particularly where space efficiency matters.
Double Garage Door Spring Replacement: Averages $200 to $500. Larger doors typically need two torsion springs to handle the added weight, at $60 to $200 per matched pair, with labor running $100 to $200 given the more involved job. Because these springs need to be closely matched to work correctly together, sourcing them from the same supplier or batch matters more than it does for a single-spring replacement.
If you’re deciding between standard and heavier-duty spring options generally, our guide Essential Facts You Need to Know: How Long Does a Torsion Spring Last? covers standard versus high-cycle torsion springs and how that choice affects both cost and lifespan.
Costs for Repairs, Tune-Ups, and Torsion Conversions
Not every spring issue requires a full replacement, and some jobs cost meaningfully less than swapping the spring entirely. Knowing which category your problem falls into before calling for service can save a meaningful amount on the final bill, and asking your installer directly whether a tune-up or repair is realistic before assuming full replacement is the only option is always worth doing.
When a Repair or Tune-Up Costs Less Than Full Replacement
Broken Garage Door Spring Repair: Averages $100 to $300. Sometimes re-tensioning ($50 to $100) resolves the issue rather than full replacement, and a safety inspection may add $25 to $50, with emergency or after-hours service adding another $50 to $100. If the spring itself is intact but has simply lost tension over time, re-tensioning can restore normal operation without the cost of new parts.
Garage Door Spring Tune-Up: Averages $50 to $150, covering lubrication ($20 to $40) and balance adjustment, with labor typically $30 to $60 for this quicker service. A tune-up won’t fix a spring that’s already failing, but it’s an effective way to catch early wear before it turns into an unplanned repair.
Garage Door Torsion Spring Conversion: Averages $200 to $500 for homeowners upgrading from extension to torsion springs, including new springs, brackets, and a torsion bar, with labor at $150 to $250 given the complexity of the upgrade. This conversion is popular among homeowners replacing an older extension-spring system specifically for the safety and longevity benefits torsion springs offer.
As ULSE’s overview of automatic garage door safety standards notes, upgrades like a torsion conversion are also an opportunity to confirm the whole system, not just the spring, meets current safety expectations for automatic residential doors, since a conversion touches enough of the hardware that it’s a natural point to double-check everything else too.
Prices of New Garage Door Springs
If you’re pricing out parts specifically, individual spring costs are fairly consistent across suppliers.
What Individual Springs Cost Before Labor
- Torsion Springs: $30 to $100 each, depending on size and material, with heavier doors needing more robust (and pricier) springs.
- Extension Springs: $15 to $45 each, generally less expensive but often needing more frequent replacement than torsion springs.
- Bulk Purchases: Buying multiple springs, such as for a commercial property, can bring per-spring cost down by 10% to 20%, which matters most for property managers handling several doors at once.
As Angi’s guide to inspecting and maintaining your garage door notes, catching a worn spring during a routine inspection, rather than after it snaps, often means the difference between a planned tune-up cost and an emergency repair bill.
Budgeting for Your LiftMaster Spring Replacement
LiftMaster garage door spring replacement costs vary mainly by spring type, door size, and whether cables or a torsion bar need attention alongside the spring itself. Knowing the typical ranges for your specific situation, whether that’s a standard torsion spring or a double-door setup, makes it much easier to spot a fair quote when you’re comparing service providers, and to know which add-ons are worth paying for versus skipping.
All About Doors provides transparent, itemized quotes for every type of spring replacement covered in this guide, from a simple tune-up to a full torsion conversion. Our licensed technicians work on LiftMaster systems regularly and can tell you exactly what your specific repair will involve, parts and labor both, before any work begins. Contact us or give us a call for a spring replacement quote today.
Frequently Asked Questions
How much are the springs on a garage opener?
Springs themselves typically run $50 to $150 each depending on type, with torsion springs costing more than extension springs. Adding professional labor brings the total to roughly $150 to $350 per spring.
Can you replace a garage door spring by yourself?
It's possible but not recommended unless you have real experience, since the tension involved can cause serious injury if something goes wrong. Most homeowners are better off hiring a professional.
How long does a garage spring replacement take?
A professional technician typically completes the job in 1 to 2 hours, including removal, installation, and a final test of the door's operation. DIY attempts usually take considerably longer.
Should I replace both garage door springs?
Yes, generally. Replacing both at once, even if only one has failed, keeps tension balanced and reduces the risk of the second spring failing shortly after.
Does the cost differ much between spring brands?
Not dramatically. Labor tends to be the larger cost driver rather than brand, though premium or high-cycle springs cost more upfront regardless of brand.
Is a torsion spring conversion worth the extra cost?
For many homeowners with older extension-spring systems, yes, since torsion springs offer better safety and longevity, though the upfront conversion cost is higher than a straightforward replacement.
What makes emergency spring repair more expensive?
After-hours or same-day emergency service typically adds $50 to $100 to the standard repair cost, reflecting the faster response and off-schedule labor.
Can a spring tune-up prevent the need for full replacement?
Sometimes, especially if caught early. A tune-up addresses lubrication and balance, but a spring with visible damage or significant wear still needs full replacement regardless of tune-up service.
Why do roll-up doors cost more to service than standard doors?
Roll-up doors use a different spring design that often requires specialized tools and expertise, which increases both parts availability challenges and labor time compared to standard sectional doors.
